User's Manual
GXP2130/GXP2140/GXP2160/GXP2170/GXP2135   
ADMINISTRATION GUIDE 
Page 48 of 85 
the date and time from the server. The default setting is us.pool.ntp.org. 
NTP Update Interval 
Time interval for updating time from the NTP server. Valid time value is in 
between 5 to 1440 minutes. The default setting is “1440” minutes. 
Allow DHCP Option 42 
Override NTP Server 
Defines  whether  DHCP  Option 42  should  override  NTP  server  or  not. 
When enabled, DHCP Option 42 will override the NTP server if it's set up 
on the LAN. The default setting is "Yes". 
Time Zone 
Configures the date/time used on the phone according to the specified 
time zone. 
Self-Defined Time Zone 
This parameter allows the users to define their own time zone.   
The syntax is: std offset dst [offset], start [/time], end [/time]   
Default is set to: MTZ+6MDT+5,M4.1.0,M11.1.0   
MTZ+6MDT+5 
This indicates a time zone with 6 hours offset with 1 hour ahead (when 
daylight saving) which is U.S central time. If it is positive (+) if the local 
time  zone  is  west  of  the  Prime  Meridian  (A.K.A:  International  or 
Greenwich Meridian) and negative (-) if it is east.   
M4.1.0,M11.1.0   
The 1st number indicates Month: 1,2,3.., 12 (for Jan, Feb, .., Dec)   
The 2nd number indicates the nth iteration of the weekday: (1st Sunday, 
3
rd
Tuesday…)   
The  3rd  number  indicates  weekday:  0,1,2,..,6(  for  Sun,  Mon, 
Tues,... ,Sat)   
Therefore, this example is the DST which starts from the First Sunday of 
April to the 1st Sunday of November. 
Date Display Format 
Configures the date display format on the LCD. The following formats are 
supported: 
  yyyy-mm-dd: 2012-07-02 
  mm-dd-yyyy: 07-02-2012 
  dd-mm-yyyy: 02-07-2012 
  dddd, MMMM dd: Friday, October 12 
  MMMM dd, dddd: October 12, Friday 
The default setting is yyyy-mm-dd. 
Time Display Format 
Configures the time display in 12-hour or 24-hour format on the LCD. The 
default setting is in 12-hour format. 
Settings  Web Service 
Enable Weather Update 
Configures  to  enable  or  disable  weather  update  on  the  phone.  The 
default setting is "Yes". If set to "No", the weather information screen will 
not show. 










