User's Manual

GXP2130/GXP2140/GXP2160/GXP2170/GXP2135
ADMINISTRATION GUIDE
Page 37 of 85
"Standard".
Broadsoft Call Center
Default setting is "No". When set to "Yes", a soft key “BSCCenter” is displayed
on LCD. User can access different Broadsoft Call Center agent features via
this softkey. Please note that “Feature Key Synchronization” will be enabled
regardless of this setting.
Hoteling Event
Broadsoft Hoteling event feature. Default setting is "No". With “HotelingEvent”
enabled, user can access the Hoteling feature option by pressing the
“BSCCenter” sof tkey.
Call Center Status
When set to "Yes", the phone will send SUBSCRIBE to the server to obtain call
center status. The default setting is "No".
Broadsoft Executive
Assistant
When enabled, Feature Key Synchronization will be enabled regardless of
web settings.
Feature Key
Synchronization
This feature is used for Broadsoft call feature synchronization. When
it'senabled, DND, Call Forward features and Call Center Agent status can
besynchronized between Broadsoft server and phone. The default settingis
"Disabled".
Broadsoft Call Park
When enabled, it will send SUBSCRIBE to Broadsoft server to obtain Call Park
notifications. The default setting is “Disabled”.
Account x  SIP Settings  Session Timer
Session Expiration
The SIP Session Timer extension (in seconds) that enables SIP sessions to be
periodically "refreshed" via a SIP request (UPDATE, or re-INVITE). If there is
no refresh via an UPDATE or re-INVITE message, the session will be
terminated once the session interval expires. Session Expiration is the time (in
seconds) where the session is considered timed out, provided no successful
session refresh transaction occurs beforehand. The default setting is 180. The
valid range is from 90 to 64800.
Min-SE
The minimum session expiration (in seconds). The default value is 90
seconds. The valid range is from 90 to 64800.
Caller Request Timer
If set to "Yes" and the remote party supports session timers, the phone will use
a session timer when it makes outbound calls. The default setting is "No".
Callee Request Timer
If set to "Yes" and the remote party supports session timers, the phone will use
a session timer when it receives inbound calls. The default setting is "No".
Force Timer
If Force Timer is set to "Yes", the phone will use the session timer even if the
remote party does not support this feature. If Force Timer is set to "No", the
phone will enable the session timer only when the remote party supports this
feature. To turn off the session timer, select "No". The default setting is "No".
UAC Specify Refresher
As a Caller, select UAC to use the phone as the refresher; or select UAS to