User's Manual

FIRMWARE VERSION 1.0.1.14 GXP2130/GXP2140/GXP2160 USER MANUAL Page 37 of 84
All the users that belong to the same SCA group will be notified by visual indicator when a user seizes the
line and places an outgoing call, and all the users of this group will not be able to seize the line until the line
goes back to an idle state or when the call is placed on hold (with the exception of when multiple call
appearances are enabled on the server side).
In the middle of the conversation, there are two types of hold: Public Hold and Private Hold. When a
member of the group places the call on public hold, the other users of the SCA group will be notified of this
by the red-flashing button and they will be able to resume the call from their phone by pressing the line
button. However, if this call is placed on private-hold, no other member of the SCA group will be able to
resume that call.
To enable shared call appearance, the user would need to register the shared line account on the phone.
In addition, they would need to navigate to "Settings"->"Programmable Keys" on the web UI and set the
line key mode as "Shared Line". If the user requires more shared call appearances, the user can configure
multiple line buttons to be "shared line" buttons associated with the account.
CALL FEATURES
The GXP2130/GXP2140/GXP2160 supports traditional and advanced telephony features including caller
ID, caller ID with caller Name, call forward and etc.
Table 12: CALL FEATURES
*30
Block Caller ID (for all subsequent calls)
 Off hook the phone;
 Dial *30.
*31
Send Caller ID (for all subsequent calls)
 Off hook the phone;
 Dial *31.
*50
Disable Call Waiting
 Off hook the phone;
 Dial *50.
*51
Enable Call Waiting
 Off hook the phone;
 Dial *51.