User manual

FIRMWARE VERSION 1.0.5.15 GXP2124 USER MANUAL Page 27 of 71
• Initiate a conference call.
 Establish calls with 2 or more parties respectively;
 While 1 call is active, the other call will be put on hold with its LINE key blinking in green;
 Press CONFERENCE key ;
 Press the desired LINE key on hold, the conference will be established;
 Repeat the previous 2 steps for all the other parties to join the conference.
• Cancel Conference.
 If after pressing the CONFERENCE key , the user decides not to conference, press Cancel
softkey or the current active LINE key (LED in solid green);
 This will resume the 2-way conversation with the current line.
• Split and Re-conference.
 During the conference, press HOLD softkey. The conference call will be split and the calls will be
put on hold separately with the LINE keys blinking in green;
 Select 1 LINE key and press to resume the 2-way conversation;
 If users would like to re-establish conference call, before 1 separate LINE is selected, press the
ReConf softkey right after the conference call is held/split;
• End Conference.
 Press HOLD softkey to split the conference call. The conference call will be ended with both calls
on hold; Or
 Users could press the EndCall softkey or simply hang up the call to terminate the conference call.
GXP2124 supports Easy Conference Mode, which can be used combined with the traditional way to
establish the conference.
• Initiate a conference call.
 Establish 1 call;
 Press CONFERENCE key and a new line will be brought up using the same account;
 Dial the number and press SEND key to establish the second call;