User's Manual

P a g e | 36
GXP17xx Administration Guide
Headset RX gain
Configures the receiving gain of the headset. The default value is 0dB.
Handset TX gain
Configures the transmission gain of the handset. The default value is 0
dB.
Settings  LCD Display
Backlight Brightness: Active
Configures the LCD brightness when the phone is active. Valid range is
10 to 100 where 100 is the brightest. Default value is 100.
Backlight Brightness: Idle
Configures the LCD brightness when the phone is idle. Valid range is 10
to 100 where 0 is off and 100 is the brightest. Default value is 60.
Disable Missed Call
Backlight
If set to "Yes", the screen will turn off the LCD backlight when there is a
missed call on the phone. The default setting is "No".
Wallpaper Source
Specifies the wallpaper source mode: Default, Download, USB and
Uploaded. User could upload a wallpaper source into your phone, or
download it from file server with the server path, or plug your USB drive
with wallpaper source into ph to upload the wallpaper.
Wallpaper Server Path
Specifies the wallpaper server path. This option will take effect when
wallpaper source is “Download”.
Upload Wallpaper
Click on the “Upload” button to browse and upload the desired wallpaper
file. This option will take effect when wallpaper source is “Uploaded”.
Screensaver
Disable/Enable Screensaver. By default, screensaver is enabled.
Screensaver Source
This option is used for users to set the location where screensaver is
loaded from. If from USB, please have a folder named “screensavers”
containing your pictures.
Screensaver Timeout
Configures the minutes of idle before the screensaver activates. Valid
range is 3 to 6. The default time is 3 minutes.
Settings  LCD Control
BLF LED Pattern
This is used to configure the color and pattern of the LED based on
status updates. The default setting is “Default”.
The BLF LED Patterns are listed in the following Table 13.
Settings  Date and Time
NTP Server
Defines the URL or IP address of the NTP server. The phone may obtain
the date and time from the server. The default setting is us.pool.ntp.org.
NTP Update Interval
Time interval for updating time from the NTP server. Valid time value is in
between 5 to 1440 minutes. The default setting is “1440” minutes.
Allow DHCP Option 42
Override NTP Server
Defines whether DHCP Option 42 should override NTP server or not.
When enabled, DHCP Option 42 will override the NTP server if it's set up
on the LAN. The default setting is "Yes".
Time Zone
Configures the date/time used on the phone according to the specified