User's Manual

P a g e | 26
GXP17xx Administration Guide
displayed on LCD. User can access different Broadsoft Call Center agent
features via this softkey. Please note that “Feature Key Synchronization” will
be enabled regardless of this setting.
Hoteling Event
Broadsoft Hoteling event feature. Default setting is "No". With “Hoteling
Event” enabled, user can access the Hoteling feature option by pressing the
“BSCCenter” sof tkey.
Call Center Status
When set to "Yes", the phone will send SUBSCRIBE to the server to obtain
call center status. The default setting is "No".
Broadsoft Executive
Assistant
When enabled, Feature Key Synchronization will be enabled regardless of
web settings.
Feature Key
Synchronization
This feature is used for Broadsoft call feature synchronization. When it's
enabled, DND, Call Forward features and Call Center Agent status can be
synchronized between Broadsoft server and phone. The default setting is
"Disabled".
Broadsoft Call Park
When enabled, it will send SUBSCRIBE to Broadsoft server to obtain Call
Park notifications. The default setting is “Disabled”.
Account x  SIP Settings  Session Timer
Session Expiration
The SIP Session Timer extension (in seconds) that enables SIP sessions to
be periodically "refreshed" via a SIP request (UPDATE, or re-INVITE). If there
is no refresh via an UPDATE or re-INVITE message, the session will be
terminated once the session interval expires. Session Expiration is the time
(in seconds) where the session is considered timed out, provided no
successful session refresh transaction occurs beforehand. The default setting
is 180. The valid range is from 90 to 64800.
Min-SE
The minimum session expiration (in seconds). The default value is 90
seconds. The valid range is from 90 to 64800.
Caller Request Timer
If set to "Yes" and the remote party supports session timers, the phone will
use a session timer when it makes outbound calls. The default setting is "No".
Callee Request Timer
If set to "Yes" and the remote party supports session timers, the phone will
use a session timer when it receives inbound calls. The default setting is
"No".
Force Timer
If Force Timer is set to "Yes", the phone will use the session timer even if the
remote party does not support this feature. If Force Timer is set to "No", the
phone will enable the session timer only when the remote party supports this
feature. To turn off the session timer, select "No". The default setting is "No".
UAC Specify Refresher
As a Caller, select UAC to use the phone as the refresher; or select UAS to
use the Callee or proxy server as the refresher. The default setting is "Omit".
UAS Specify Refresher
As a Callee, select UAC to use caller or proxy server as the refresher; or