User's Manual

P a g e | 63
GXP17xx Administration Guide
In the option Capture Location, User can select to store the capture file in phone’s internal storage or
extended USB storage. When the Capture Location is specified as USB, a USB drive must be connected.
When USB is selected as the capture location, user can define the capture file name in USB Filename
field. User can also define whether RTP packets will be captured or not from With RTP Packets option.
Note: Only GXP17xx supports USB connection.
Figure 8: Capture to USB Drive
Figure 9: Capture to Internal Storage
When the capture configuration is set, press Start button to start packet capture. The Status will become
RUNNING while capturing, as showed in Figure 8 and Figure 9. Press Stop button to end capture.
If the capture location is internal storage, user can press Download button to download capture file to local
PC. If capture location is USB, the file will be saved on USB automatically with the defined name. The
capture file is in .pcap format.