User's Manual

P a g e | 51
GXP17xx Administration Guide
Configuration
Maintenance  Syslog
Syslog Server
The URL or IP address of the syslog server for the phone to send syslog to.
Syslog Level
Selects the level of logging for syslog. The default setting is "None". There
are 4 levels: DEBUG, INFO, WARNING and ERROR.
Syslog messages are sent based on the following events:
 Product model/version on boot up (INFO level);
 NAT related info (INFO level);
 sent or received SIP message (DEBUG level);
 SIP message summary (INFO level);
 inbound and outbound calls (INFO level);
 registration status change (INFO level);
 negotiated codec (INFO level);
 Ethernet link up (INFO level);
 SLIC chip exception (WARNING and ERROR levels);
 Memory exception (ERROR level).
Send SIP Log
Configures whether the SIP log will be included in the syslog messages.
The default setting is "No".
Auto Recover From
Abnormal
If set to “Yes”, the phone will automatically recover when running abnormal.
The default setting is “Yes”.
Maintenance  Language
Display Language
Selects display language on the phone. There are 21 languages can be set
as display language, user could also choose “Auto” or “Downloaded
Language” as display language. The default setting is “Auto”.
Default Input Selection
Configure the default input selection.
Multi-Tap: multi-tap to switch character;
Shiftable: select input from available characters.
The default setting is “Multi-Tap”.
Auto language
download
This is used to configure the device to download language files
automatically from server. The default setting is “No”.
Maintenance  TR-069
ACS URL
URL for TR-069 Auto Configuration Servers (ACS).
TR-069 Username
ACS username for TR-069.
TR-069 Password
ACS password for TR-069.
Periodic Inform Enable
Enables periodic inform. If set to "Yes", device will send inform packets to
the ACS. The default setting is "No".
Periodic Inform
Sets up the periodic inform interval to send the inform packets to the ACS.