User's Manual

P a g e | 47
GXP17xx Administration Guide
Settings  Broadsoft  Broadsoft IM&P
LogIn Credentials
 Server
Broadsoft IM&P server address. Usually not necessary to
configure and can already be found in the Broadsoft IM&P
username.
 Port
Port for the Broadsoft IM&P server. Default port is 5222.
 Username
Broadsoft IM&P username, not the Broadsoft account username.
 Password
Broadsoft IM&P password, not the Broadsoft account password.
Broadsoft IM&P
Enables Broadsoft Instant Message and Presence feature. The default
setting is “Disabled”.
Associated Broadsoft
Account
Specifies the associated account. User could choose each account on
the phone.
Auto Login
Choose to whether or not login to the Broadsoft IM&P account at
boot-up. The default setting is “No”.
Display Non XMPP Contacts
Choose whether or not to display non-xmpp contacts associated with the
Broadsoft IM&P user. Non-xmpp contacts will not display a presence or
status message. The default setting is “No”.
Network Page Definitions
Table 8: Network Page Definitions
Network  Basic Settings
Internet Protocol
Selects Prefer IPv4 or Prefer IPv6. The default setting is “Prefer IPv4”.
IPv4 Address Type
Allows users to configure the appropriate network settings on the phone to
obtain IPv4 address. Users could select "DHCP", "Static IP" or "PPPoE". By
default, it is set to "DHCP".
DHCP Host name
(Option 12)
Specifies the name of the client. This field is optional but may be required by
some Internet Service Providers.
DHCP Vendor Class ID
(Option 60)
Used by clients and servers to exchange vendor class ID. The default setting
is “Grandstream GXP1760” for GXP1760, ”Grandstream GXP1780” for
GXP1780, “Grandstream GXP1782” for GXP1780.
PPPoE Account ID
Enter the PPPoE account ID.
PPPoE Password
Enter the PPPoE Password.
PPPoE Service Name
Enter the PPPoE Service Name.
IPv4 Address
Enter the IP address when static IP is used.
Subnet Mask
Enter the Subnet Mask when static IP is used for IPv4.