User's Manual
Table Of Contents
- CHANGE LOG
- GUI INTERFACE EXAMPLES
- WELCOME
- PRODUCT OVERVIEW
- CONFIGURATION GUIDE
- UPGRADING AND PROVISIONING
- RESTORE FACTORY DEFAULT SETTINGS
- EXPERIENCING GXP1760/GXP1780/GXP1782
P a g e  | 19   
GXP17xx Administration Guide 
Configuration Via Web Browser 
The  GXP1760/GXP1780/GXP1782  embedded  Web  server  responds  to  HTTP/HTTPS  GET/POST 
requests. Embedded HTML pages allow a user to configure the IP phone through a Web browser such as 
Google Chrome, Mozilla Firefox and Microsoft’s IE. 
To access the Web GUI: 
1.  Connect the computer to the same network as the phone; 
2.  Make sure the phone is turned on and shows its IP address. You may check the IP address by 
pressing Up arrow button when phone is at idle state; 
3.  Open a Web browser on your computer; 
4.  Enter the phone’s IP address in the address bar of the browser; 
5.  Enter the administrator’s login and password to access the Web Configuration Menu. 
Note: 
  The computer has to be connected to the same sub-network as the phone. This can be easily done by   
connecting  the  computer  to  the  same  hub  or  switch  as  the  phone  connected  to.  In  absence  of  a 
hub/switch (or free ports on the hub/switch), please connect the computer directly to the PC port on the 
back of the phone; 
  If the phone is properly connected to a working Internet connection, the IP address of the phone will 
display in MENU->Status->Network Status. This address has the format: xxx.xxx.xxx.xxx, where xxx 
stands for a number from 0-255. Users will need this number to access the Web GUI. For example, if 
the phone has IP address 192.168.40.154, please enter "http://192.168.40.154" in the address bar of 
the browser; 
  There are two default passwords for the login page: 
User Level 
Password 
Web Pages Allowed 
End User Level 
123 
Only Status and Maintenance 
Administrator Level 
admin 
All pages 
The password is case sensitive with maximum length of 25 characters.   
  When changing any settings, always SUBMIT them by pressing the "Save" or "Save and Apply" button 
on the bottom of the page. If the change is saved only but not applied, after making all the changes, 
click on the "APPLY" button on top of the page to submit. After submitting the changes in all the Web 
GUI  pages,  reboot  the  phone  to  have  the  changes  take  effect  if  necessary  (All  the  options  under 
"Accounts" page and "Phonebook" page do  not require reboot. Most of the options under  "Settings" 
page do not require reboot). 










