User's Manual
Table Of Contents
- CHANGE LOG
- GUI INTERFACE EXAMPLES
- WELCOME
- PRODUCT OVERVIEW
- CONFIGURATION GUIDE
- UPGRADING AND PROVISIONING
- RESTORE FACTORY DEFAULT SETTINGS
- EXPERIENCING GXP1760/GXP1780/GXP1782
P a g e  | 16   
GXP17xx Administration Guide 
System 
System sub menu includes the following options: 
  Network 
o  IP Setting 
Selects  IP  mode  (DHCP/Static  IP/PPPoE);  Configures  PPPoE 
account ID and password; Configures static IP address, Netmask, 
Gateway, DNS Server 1 and DNS Server 2. 
o  802.1X 
Enables/Disables  802.1X  mode;  Configures  802.1x  identity  and 
MD5 password. 
o  Layer 2 QoS 
Configures  802.1Q/VLAN  Tag  and  priority  value.  Select  “Reset 
Vlan Config” to reset VLAN configuration. 
  Upgrade 
o  Firmware Server 
Configures firmware server for upgrading the phone. 
o  Config Server 
Configures config server for provisioning the phone. 
o  Upgrade Via 
Specifies upgrade/provisioning via TFTP/HTTP/HTTPS. 
o  Start Provison   
Starts Provision immediately. 
  Language Download 
o  Auto Language Download 
o  Language Download 
  Factory Functions 
o  Diagnostic Mode 
All  LEDs  will  light  up.  All keys’  name  will  display  in  red  on  LCD 
screen  before  diagnosing.  Press  any  key  on  the  keypad  to 
diagnose  the  key’s  function.  When  done,  the  key’s  name  will 
display  in  blue  on  LCD.  Lift  and  put  back  the  handset  to  exit 
diagnostic mode. 
o  Audio Loopback 
Speak  to  the  phone  using  speaker/handset/headset.  If  you  can 
hear your voice, your audio is working fine. Press “Exit” soft key to 
exit audio loopback mode. 
o  LCD on/off 










