User's Manual

GXP1760W Administration Guide
P a g e | 57
Missed Call
P8312
Established Call
P8313
Terminated Call
P8314
Open DND
P8316
Close DND
P8317
Open Forward
P8318
Close Forward
P8319
Blind Transfer
P8320
Attended Transfer
P8321
Hold Call
P8324
UnHold Call
P8325
Table 11: Action URL – Supported Dynamic Variables
Supported Dynamic Variables
Dynamic Variable
Description
$phone_ip
The IP address of the phone.
$mac
The MAC address of the phone.
$product
The product name of the phone.
$program_version
The software version of the phone.
$hardware_version
The hardware version of the phone.
$language
The display language of the phone.
$local
The called number on the phone.
$display_local
The display name of the called number on the phone.
$remote
The call number on the remote phone.
$display_remote
The display name of the call number on the remote phone.
$active_user
The account number during a call on the phone.
After the user finishes setting Action URL on phone’s web UI, when the specific phone event occurs on the
phone, phone will send the Action URL to the specified SIP server. The dynamic variables in the Action URL
will be replaced by the actual values.
Here is an example:
Configure the following Action URL on the phone’s web UISettingsOutbound NotificationAction URL:
Incoming Call: 192.168.5.250/mac=$mac&display_remote =$display_remote
Outgoing Call: 192.168.5.250/remote=$remote&phone_ip=$phone_ip
On Hold: 192.168.5.250/program_version=$program_version