User's Manual

GXP1760W Administration Guide
P a g e | 55
Note:
- User can also define whether RTP packets will be captured or not using With RTP Packets option.
- USB Filename is only required for USB and it defines the capture filename.
Multicast Paging
GXP1760W supports multicast paging, including sending and listening. On the phone, users could send
multicast page by setting the multicast address and port. Also, users can listen to at most 10-different
multicast IP address.
Multicast sender related settings are under Web UI, SettingsProgrammable keys. Select Multicast
paging as the key mode for dial page call. Multicast paging listening related settings are under Web UI
SettingsMulticast Paging.
For more details on Multicast paging features, please visit http://www.grandstream.com/support to
download the latest “ Multicast Paging User Guide”.
Configuring Eventlist BLF
Grandstream GXP1760W Enterprise IP Phones support both Grandstream UCM Busy Lamp Filed and
Eventlist BLF features and allows end users, such as attendant, to monitor the call status of users in the
list. GXP1760W supports this feature by sending out the subscription request to the UCM and changing the
indicator status of the Line keys, MPKs, or virtual MPKs that associated with the monitored users.
Additionally, the phone is also able to pick up the calls to the monitored extensions by using a pre-defined
feature code called BLF- Call-pickup Prefix.
For more details on Eventlist BLF configuration, please refer to following guide: Eventlist BLF Guide
Configuring VPK Keys
Grandstream GXP1760W Enterprise IP Phones support VPK (“Virtual Multi-Purpose Keys”) feature to add
more flexibility and provide better user experience using Multi-Purpose Keys modes. With the new VPK
feature design, line keys can be assigned with multiple functions. Users have also the ability to add more
VPKs which will be displayed on different screens.
For more details on VPK configuration, please refer to following guide: VPK Configuration Guide
Outbound Notification Support
Outbound notification option can be found under device web UISettingsOutbound Notifications. In the
web UI, under Outbound Notifications: “Action URL” can be found.
To use Outbound NotificationAction URL, users need to know the supported events and the dynamic
variables for the supported events. The dynamic variables for the supported events will be replaced by the
actual values on the phone in order to notify the event to SIP server.