User's Manual
Table Of Contents
- User manual.pdf
- User manual.pdf
- CHANGE LOG
- GUI INTERFACE EXAMPLES
- WELCOME
- PRODUCT OVERVIEW
- CONFIGURATION GUIDE
- Configuration via Keypad
- Configuration via Web Browser
- Definitions
- Connecting the GXP1760W to WiFi
- NAT Settings
- Editing Contacts and Click-To-Dial
- Saving Configuration Changes
- Rebooting from Remote Locations
- Packet Capture
- Multicast Paging
- Configuring Eventlist BLF
- Configuring VPK Keys
- Outbound Notification Support
- UPGRADING AND PROVISIONING
- RESTORE FACTORY DEFAULT SETTINGS
- EXPERIENCING THE GXP1760W
- User manual.pdf
- FCC 普通产品
GXP1760W Administration Guide
P a g e | 48
Upgrade and Factory Reset options under System submenu, and SIP
option under Phone submenu as well.
Enable STAR key
Keypad Locking
If set to "Yes", the keypad can be locked by pressing and holding the STAR *
key for about 4 seconds. A lock icon will show indicating the keypad is locked.
The default setting is "Yes".
Note: When the keypad is locked, users would need press and hold the STAR
* key for about 4 seconds again and then enter the password to unlock it.
Password to Lock/
Unlock
Configures the password to lock/unlock the keypad.
SIP TLS Certificate
SSL Certificate used for SIP Transport in TLS/TCP.
SIP TLS Private Key
SSL Private key used for SIP Transport in TLS/TCP.
SIP TLS Private Key
Password
SSL Private key password used for SIP Transport in TLS/TCP.
Web Access Mode
Sets the protocol for web interface. The default setting is “HTTP”.
Disable SSH
Disables SSH access. The default setting is “No”.
Web/Keypad/Restrict
mode Lockout
Duration
Specifies the time in minutes that the web or LCD login interface will be locked
out to user after five login failures. This lockout time is used for web login, STAR
keypad unlock and LCD restrict mode admin login. Range is 0-60 minutes.
Maintenance Security Settings Trusted CA Certificates
Trusted CA
Certificates
Upload CA Certificate file to phone.
Note: Users can also provision the Trust CA Certificate option with XML
configuration file.
Maintenance Packet Capture
Capture Location
Choose location where the capture will be stored, either on the internal storage
or on the connected USB. Default is “Internal Storage”.
With RTP Packets
Defines whether packet capture file contains RTP or not. Default setting is “No”.
USB File Name
Defines the filename of the capture. Only required for USB.
Start/Stop/Download
Click to Start/Stop and Download the packet capture.
Phonebook Page Definitions
Table 9: Phonebook Page Definitions
Phonebook Contacts
Group
Specifies to which group the contact belong.
Add Contact
Specifies Contact’s First Name, Last Name, Phone Number, Accounts and Groups
to add one new contact in phonebook.
Edit Contact
Edits selected contact.
Delete All Contacts
Deletes all contacts from phonebook.