User's Manual
Table Of Contents
- User manual.pdf
- User manual.pdf
- CHANGE LOG
- GUI INTERFACE EXAMPLES
- WELCOME
- PRODUCT OVERVIEW
- CONFIGURATION GUIDE
- Configuration via Keypad
- Configuration via Web Browser
- Definitions
- Connecting the GXP1760W to WiFi
- NAT Settings
- Editing Contacts and Click-To-Dial
- Saving Configuration Changes
- Rebooting from Remote Locations
- Packet Capture
- Multicast Paging
- Configuring Eventlist BLF
- Configuring VPK Keys
- Outbound Notification Support
- UPGRADING AND PROVISIONING
- RESTORE FACTORY DEFAULT SETTINGS
- EXPERIENCING THE GXP1760W
- User manual.pdf
- FCC 普通产品
GXP1760W Administration Guide
P a g e | 42
from computer. If enabled, a reboot is required to establish the communication.
Default is “Disabled”.
GS Affinity CTI Application is available HERE and its User Guide from HERE.
Preferred Account
Chooses the account on which CTI support is enabled.
Network Page Definitions
Table 7: Network Page Definitions
Network Basic Settings
Internet Protocol
Selects IPv4 Only, IPv6 Only or Both IPv4 & IPv6. Default setting is “IPv4 Only”.
IPv4 Address
Allows users to configure the appropriate network settings on the phone to obtain
IPv4 address from DHCP server.
DHCP Host name
(Option 12)
Specifies the name of the client. This field is optional but may be required by
some Internet Service Providers.
DHCP Vendor Class
ID (Option 60)
Used by clients and servers to exchange vendor class ID. The default setting is
“Grandstream GXP1760W”.
PPPoE Account ID
Enter the PPPoE account ID.
PPPoE Password
Enter the PPPoE Password.
PPPoE Service Name
Enter the PPPoE Service Name.
Statically configured
as
Select to apply the static configuration set for the IP address.
IPv4 Address
Enter the IP address when static IP is used.
Subnet Mask
Enter the Subnet Mask when static IP is used for IPv4.
Gateway
Enter the Default Gateway when static IP is used for IPv4.
DNS Server 1
Enter the DNS Server 1 when static IP is used for IPv4.
DNS Server 2
Enter the DNS Server 2 when static IP is used for IPv4.
Preferred DNS
Server
Enter the Preferred DNS Server for IPv4.
IPv6 Address
Allows users to configure the appropriate network settings on the phone to obtain
IPv6 address. Users could select “Auto-configured” or “Statically configured” for
the IPv6 address type.
Static IPv6 Address
Enter the static IPv6 address when Full Static is used in “Statically configured”
IPv6 address type.
IPv6 Prefix Length
Enter the IPv6 prefix length when Full Static is used in “Statically configured”
IPv6 address type.
Prefix Static
Select to apply the prefix set on IPv6 Prefix when using “Statically configured”
IPv6 address type.
IPv6 Prefix (64 bits)
Enter the IPv6 Prefix (64 bits) when Prefix Static is used in “Statically configured”