User's Manual

GXP1760W Administration Guide
P a g e | 38
• LDAP Search
This option is to narrow the LDAP search scope. Enter the LDAP search base
in the Description field. It could be the same or different from the Base in LDAP
configuration under Advanced Settings. The Base in LDAP configuration will
be used if the Description field is left blank. Enter the LDAP Name/Number
filter in the Value field. For example:
If users set MPK 1 as “LDAP Search” for “Account 1”, and set filters:
Description  ou=video,ou=SZ,dc=grandstream,dc=com
Value  sn=Li
Since the Base for LDAP server configuration is “dc=grandstream,dc=com”,
“ou=video,ou=SZ” is added to narrow the LDAP search scope. “sn=Li” is the
example to filter the last name.
• Multicast Paging
This option is for multicast sending. Enter Line key description in Description
field and multicast sending address in Value field.
• Record
This option is for Recording calls. Enter Line key description in Description
filed and the recorded extension number in Value field. Please make sure
whether your VOIP provider supports this feature before using it.
• Call Log
Select Account and enter account number in the Value field to allow
configuration of call log for other extension.
• Menu
This option is to take users to the main menu screen directly.
• Information
Display system information such as IP address, MAC address and software
version.
• Message
Display information about instant messages and voice mails received for the
programmed account.
Idle Screen Softkeys
Assigns a function to the corresponding Softkeys. The key mode options are:
• Speed Dial
Select the Account to dial from. And enter the Speed Dial number in the Value
field to be dialed.
• Speed Dial via active account
Similar to Speed Dial but it will dial based on the current active account.
For example, if the phone is offhook and account 2 is active, it will call the
configured Speed Dial number using account 2.