User's Manual
Table Of Contents
- User manual.pdf
- User manual.pdf
- CHANGE LOG
- GUI INTERFACE EXAMPLES
- WELCOME
- PRODUCT OVERVIEW
- CONFIGURATION GUIDE
- Configuration via Keypad
- Configuration via Web Browser
- Definitions
- Connecting the GXP1760W to WiFi
- NAT Settings
- Editing Contacts and Click-To-Dial
- Saving Configuration Changes
- Rebooting from Remote Locations
- Packet Capture
- Multicast Paging
- Configuring Eventlist BLF
- Configuring VPK Keys
- Outbound Notification Support
- UPGRADING AND PROVISIONING
- RESTORE FACTORY DEFAULT SETTINGS
- EXPERIENCING THE GXP1760W
- User manual.pdf
- FCC 普通产品
GXP1760W Administration Guide
P a g e | 36
• dd-mm-yyyy: 02-07-2012
• dddd, MMMM dd: Friday, October 12
• MMMM dd, dddd: October 12, Friday
Time Display
Format
Configures the time display in 12-hour or 24-hour format on the LCD. The default
setting is in 12-hour format.
Settings Web Service
Use Auto Location
Service
Enables/disables auto location services on the phone. Default setting is “Yes”.
Settings XML Application
Idle Screen XML
Download
Configures to enable idle screen XML download. Users could select
HTTP/HTTPS/TFTP to download the XML idle screen file. Default setting is "No".
Download Screen
XML at Boot-up
If set to "Yes", the idle screen XML file will be downloaded when the phone boots
up. The default setting is "No".
Use Custom
Filename
Specifies the custom file for the idle screen XML file to be downloaded.
Idle Screen XML
Server Path
Configures the server path to download the idle screen XML file. This field could
be IP address or URL, with up to 256 characters.
Settings Programmable Keys
Virtual Multi-
Purpose Keys
Settings
Call Screen SettingsKey Mode: Defines the key mode used. Two modes are
available:
• Line Mode: Each configured line key can only hold 1 call, and users can
switch to choose between accounts by pressing on a free line key.
Advantage: Easy to manage. Disadvantage: Limited line space.
• Account Mode: Each configured line key is reserved for the corresponding
account and can have up to 8 grouped lines. Users can press on “New call”
softkey to initiate a new call.
Advantage: Multiple calls per key. Disadvantage: Can get a bit complicated
Virtual Multi-
Purpose Keys (VPK)
Assigns a function to the corresponding VPK. The key mode options are:
• Line
Regular line key to open up a line and switch line. The Value field can be left
blank.
• Shared Line
Share line for Shared Line Appearance feature. Select the Account registered
as Shared line for the line key. The Value field can be left blank.
• Speed Dial
Select the Account to dial from. And enter the Speed Dial number in the Value
field to be dialed, or enter the IP address to set the Direct IP call as Speed
Dial.