User's Manual

GXP1760W Administration Guide
P a g e | 35
Headset RX gain
Configures the receiving gain of the headset. The default value is 0dB.
Handset TX gain
Configures the transmission gain of the handset. The default value is 0dB.
Settings  LCD Display
Backlight
Brightness: Active
Configures the LCD brightness when the phone is active. Valid range is 10 to 100
where 100 is the brightest. Default value is 100.
Backlight
Brightness: Idle
Configures the LCD brightness when the phone is idle.
Valid range is 10 to 100 where 0 is off and 100 is the brightest. Default value is 60.
Disable Missed Call
Backlight
If set to "Yes", the screen will turn off the LCD backlight when there is a missed
call on the phone. The default setting is "No".
Hide System Softkey
on Main Page
Check to hide the system generated Softkey on main page.
Settings  Date and Time
NTP Server
Defines the URL or IP address of the NTP server. The phone may obtain the date
and time from the server. The default setting is us.pool.ntp.org.
NTP Update Interval
Time interval for updating time from the NTP server. Valid time value is in between
5 to 1440 minutes. The default setting is “1440” minutes.
Allow DHCP Option
42 Override NTP
Server
Defines whether DHCP Option 42 should override NTP server or not. When
enabled, DHCP Option 42 will override the NTP server if it's set up on the LAN.
The default setting is "Yes".
Time Zone
Configures the date/time used on the phone according to the specified time zone.
Self-Defined Time
Zone
This parameter allows the users to define their own time zone.
The syntax is: std offset dst [offset], start [/time], end [/time]
Default is set to: MTZ+6MDT+5,M4.1.0,M11.1.0
MTZ+6MDT+5
This indicates a time zone with 6 hours offset with 1 hour ahead (when daylight
saving) which is U.S central time. If it is positive (+) if the local time zone is west
of the Prime Meridian (A.K.A: International or Greenwich Meridian) and negative
(-) if it is east.
M4.1.0,M11.1.0
The 1st number indicates Month: 1,2,3.., 12 (for Jan, Feb, .., Dec)
The 2nd number indicates the nth iteration of the weekday: (1st Sunday, 3
rd
Tuesday…)
The 3rd number indicates weekday: 0,1,2,..,6 (for Sun, Mon, Tues, ... ,Sat)
Therefore, this example is the DST which starts from the First Sunday of April to
the 1st Sunday of November.
Date Display Format
Configures the date display format on the LCD. The following formats are
supported and the default setting is yyyy-mm-dd:
• yyyy-mm-dd: 2012-07-02
• mm-dd-yyyy: 07-02-2012