User's Manual

GXP1760W Administration Guide
P a g e | 25
Special Feature
Different soft switch vendors have special requirements. Therefore, users may
need select special features to meet these requirements. Users can choose
from Standard, Nortel MCS, Broadsoft, CBCOM, RNK, Sylantro, Huawei IMS
and PhonePower depending on the server type. The default setting is
"Standard".
Broadsoft Call
Center
Default setting is "No". When set to "Yes", a softkey “BSCCenter” is displayed
on LCD. User can access different Broadsoft Call Center agent features via this
softkey. Please note that “Feature Key Synchronization” will be enabled
regardless of this setting.
Hoteling Event
Broadsoft Hoteling event feature. Default setting is "No". With “Hoteling Event”
enabled, user can access the Hoteling feature option by pressing the
“BSCCenter” softkey.
Call Center Status
When set to "Yes", the phone will send SUBSCRIBE to the server to obtain
call center status. The default setting is "No".
Feature Key
Synchronization
This feature is used for Broadsoft call feature synchronization. When it's
enabled, DND, Call Forward features and Call Center Agent status can be
synchronized between Broadsoft server and phone. The default setting is
"Disabled".
Broadsoft Call Park
When enabled, it will send SUBSCRIBE to Broadsoft server to obtain Call Park
notifications. The default setting is “Disabled”.
Account x  SIP Settings  Session Timer
Enable Session
Timer
Enable/Disable session timer support.
Session Expiration
The SIP session timer expiration (in seconds) that enables SIP sessions to be
periodically “refreshed” via a SIP request (UPDATE, or re-INVITE). If there is
no refresh via an UPDATE or re-INVITE message, the session will be
terminated once the session interval expires.
Session Expiration is the time (in seconds) where the session is considered
timed out, provided no successful session refresh transaction occurs
beforehand. The default setting is 180.
The valid range is from 90 to 64800.
Min-SE
The minimum session expiration (in seconds). The default value is 90 seconds.
The valid range is from 90 to 64800.
Caller Request
Timer
If set to “Yes” and the remote party supports session timers, the phone will use
a session timer when it makes outbound calls. The default setting is “No”.
Callee Request
Timer
If set to “Yes” and the remote party supports session timers, the phone will use
a session timer when it receives inbound calls. The default setting is “No”.
Force Timer
If Force Timer is set to “Yes”, the phone will use the session timer even if the
remote party does not support this feature.