User's Manual

GXP1760W Administration Guide
P a g e | 24
If set to “Yes”, the Privacy Header will always be shown on the INVITE.
If set to “No”, the Privacy Header won’t be shown on the INVITE. Default setting
is “Default”.
Use P-Preferred-
Identity Header
Controls whether the P-Preferred-Identity Header will present in the SIP INVITE
message. The default setting is “default”. The P-Preferred-Identity Header will
show in INVITE unless “Huawei IMS” special feature is on.
If set to “Yes”, the P-Preferred-Identity Header will always show in INVITE.
If set to “No”, the P-Preferred-Identity Header will not show in INVITE.
Ignore Alert-Info
Header
Selects whether default ringtone will be played by ignoring alert-info header.
Account x  SIP Settings  Advanced Features
Line Seize Timeout
For Shared Call Appearance, phone must send a SUBSCRIBE-request for the
line-seize event package whenever a user attempts to take the shared line off
hook. “Line Seize Timeout” is the line-seize event expiration timer. The default
value is 15 seconds. The valid range is from 15 to 60.
Eventlist BLF URI
Configures the Eventlist BLF URI on the phone to monitor the extensions in the
list with Multi-Purpose Key. If the server supports this feature, users need to
configure an Eventlist BLF URI on the service side first (i.e.,
[e-mail]) with a list of extensions included. On the phone, in
this "Eventlist BLF URI" field, fill in the URI without the domain (i.e., BLF1006).
To monitor the extensions in the list, under Web
GUISettingsProgrammable Keys page, please select "Eventlist BLF" in the
key mode, choose account, enter the value of each extension in the list.
Auto Provision
Eventlist BLFs
When option is enabled, empty multi-purpose keys will be automatically
provisioned to the monitored extensions in the Eventlist BLF. The default setting
is “Disabled”.
Conference URI
Configures Conference URI for N-way conference (Broadsoft Standard).
Music On Hold URI
Configures Music On Hold URI to call when a call is on hold. This feature has
to be supported on the server side.
Force BLF Call-
pickup by prefix
Configures to always use the prefix for BLF Call-pickup. The default setting is
“No”.
BLF Call-pickup
Prefix
Configures the prefix prepended to the BLF extension when the phone picks up
a call with BLF key. The default setting is **.
Call Pickup Barge-
In Code
Set Feature Access Code of Call Pickup with Barge-In feature.
PUBLISH for
Presence
Enables presence feature on the phone. The default setting is "No".
Omit charset=UTF-8
in MESSAGE
Omit charset=UTF-8 in MESSAGE content-type.