User's Manual

GXP1760W Administration Guide
P a g e | 20
NAT Traversal
Displays the status of NAT connection for each account on the phone.
Status  System Info
Product Model
Product model of the phone.
Part Number
Product part number.
Software Version
• Boot: boot version number.
• Core: core version number.
• Base: base version number.
• Prog: program version number. This is the main firmware release number,
which is always used for identifying the software system of the phone.
• Locale: locale version number.
• Recovery: recovery version number.
IP Geographic
Information
• City: displaying city.
• Language: displaying language.
• Time Zone: displaying time zone.
System Up Time
System up time since the last reboot.
System Time
Current system time on the phone system.
Service Status
GUI and Phone service status.
Core Dump
Displays the core dump file when available and which could be downloaded for
troubleshooting purpose.
Accounts Page Definitions
Table 5: Account Page Definitions
Account x  General Settings
Account Active
Indicates whether the account is active. The default setting is "Yes".
Account Name
Configures name associated with each account to be displayed on the LCD.
SIP Server
Specifies the URL or IP address, and port of the SIP server. This should be
provided by VoIP service providers (ITSP).
Secondary SIP
Server
Specifies the URL or IP address, and port of the SIP server. This will be used
when the primary SIP server fails.
Outbound Proxy
Configures the IP address or the domain name of the primary outbound proxy,
media gateway or session border controller. It's used by the phone for firewall
or NAT penetration in different network environments. If a symmetric NAT is
detected, STUN will not work and only an outbound proxy can provide a
solution.
Backup Outbound
Proxy
Configures secondary outbound proxy which will be used when the primary
proxy cannot be connected.
BLF Server
Configures the optional server used for SUBSCRIBE requests to indicate other
extensions status on the SIP server.