User's Manual

GXP1610/GXP1620/GXP1625/GXP1628
Administration Guide
Page 35 of 47
HTTPS.
Firmware Server Path
Defines the server path for the firmware server. It could be different from the
configuration server for provisioning.
Config Server Path
Defines the server path for provisioning. It could be different from the firmware
server for upgrading.
Firmware File Prefix
This field enables user to store different versions of firmware files in one
single directory on the firmware server. If configured, only the firmware file
with the matching prefix will be downloaded.
Firmware File Postfix
This field enables user to store different versions of firmware files in one
single directory on the firmware server. If configured, only the firmware file
with the matching postfix will be downloaded.
Config File Prefix
This field enables user to store different configuration files in one single
directory on the configuration server. If configured, only the configuration file
with the matching prefix will be downloaded.
Config File Postfix
This field enables user to store different configuration files in one single
directory on the configuration server. If configured, only the configuration file
with the matching postfix will be downloaded.
Allow DHCP Option 43
and Option 66 Override
Server
Default setting is “Yes”. DHCP option 66 originally was only designed for
TFTP server. Later on it was extended to support an HTTP URL. GXPphones
support both TFTP and HTTP server via option 66. Users can alsouse DHCP
option 43 vendor specific option to do this. DHCP option 43 approach has
priorities.
Allow DHCP Option 120
to override SIP Server
Enables DHCP Option 120 from local server to override the SIP Server on the
phone. The default setting is "No".
3CX Auto Provision
Phone will multicast SUBSCRIBE for provision if this feature is enabled.
Automatic Upgrade
Enables automatic upgrade and provisioning. The default setting is "No".
Hour of the Day (0-23)
Defines the hour of the day to check the HTTP/TFTP server for firmware
upgrades or configuration files changes. The default value is 1.
Day of the Week (0-6)
Defines the day of the week to check HTTP/TFTP server for firmware
upgrades or configuration files changes. The default value is 1.
Disable SIP NOTIFY
Authentication
Device will not challenge NOTIFY with 401 when set to Yes.
Authenticate Conf File
Authenticates configuration file before acceptance. The default setting is "No".
Download Device
Configuration
User can press the “Download” button to export the device’s configuration file.
The configuration file is named as “config.txt”.
Maintenance ->Syslog
Syslog Server
The URL or IP address of the syslog server for the phone to send syslog to.
Syslog Level
Selects the level of logging for syslog. The default setting is "None".There are
4 levels:DEBUG, INFO, WARNING and ERROR.
Syslog messages are sent based on the following events:
 product model/version on boot up (INFO level);
 NAT related info (INFO level);
 sent or received SIP message (DEBUG level);
 SIP message summary (INFO level);
 inbound and outbound calls (INFO level);
 registration status change (INFO level);
 negotiated codec (INFO level);
 Ethernet link up (INFO level);
 SLIC chip exception (WARNING and ERROR levels);
 Memory exception (ERROR level).