User's Manual

GXP1610/GXP1620/GXP1625/GXP1628
Administration Guide
Page 26 of 47
Explanation of example rule (reading from left to right):
 ^1900x. - prevents dialing any number started with 1900;
 <=1617>[2-9]xxxxxx - allows dialing to local area code (617) numbers by
dialing7 numbers and 1617 area code will be added automatically;
 1[2-9]xx[2-9]xxxxxx |- allows dialing to any US/Canada Number with 11
digitslength;
 011[2-9]x - allows international calls starting with 011;
 [3469]11 - allows dialing special and emergency numbers 311, 411, 611
and 911.
Note:
In some cases where the user wishes to dial strings such as *123 to activate
voice mail or other applications provided by their service provider, the * should
be predefined inside the dial plan feature. An example dial plan will be: { *x+ }
which allows the user to dial * followed by any length of numbers.
Delayed Call Forward
Wait Time
Defines the timeout (in seconds) before the call is forwarded on no answer.
Valid range is 1 to 120.
Enable Call Features
The default setting is "Yes". When enabled, call features using star codes will
besupported locally. If set to "No", Call Features and DND options under LCD
menu are supported. And ForwardAll softkey will not be displayed in LCD for
Account 1.
Call Log
Configures Call Log setting on the phone. You can log all calls, only log
incoming/outgoing calls or disable call log. The default setting is "Log All
Calls".
Account Ring Tone
Configures ring tone for the account.
Match Incoming Caller
ID
Specifies matching rules with number, pattern or Alert Info text. When the
incoming caller ID or Alert Info matches the rule, the phone will ring with
selected distinctive ringtone. Matching rules:
 Specific caller ID number. For example, 8321123;
 A defined pattern with certain length using x and + to specify, where x
could be any digit from 0 to 9. Samples:
xx+ : at least 2-digit number;
xx : only 2-digit number;
[345]xx: 3-digit number with the leading digit of 3, 4 or 5;
[6-9]xx: 3-digit number with the leading digit from 6 to 9.
 Alert Info text
Users could configure the matching rule as certain text (e.g., priority) and
select the custom ring tone mapped to it. The custom ring tone will be
used if the phone receives SIP INVITE with Alert-Info header in the
following format:
Alert-Info: <http://127.0.0.1>; info=priority
Selects the distinctive ring tone for thematching rule. When the incoming
caller ID or Alert Info matches the rule, the phone will ring with the selected
ring.
Ring Timeout
Defines the timeout (in seconds) for the rings on no answer. The default
setting is 60 seconds.
Send Anonymous
If set to "Yes", the "From" header in outgoing INVITE messages will be set to
anonymous, essentially blocking the Caller ID to be displayed.
Anonymous Call
Rejection
If set to "Yes", anonymous calls will be rejected. The default setting is "No".
Auto Answer
If set to "Yes", the phone will automatically turn on the speaker phone to
answer incoming calls after a short reminding beep.