User's Manual

GXP1610/GXP1620/GXP1625/GXP1628
Administration Guide
Page 21 of 47
IP Geographic
Information
 City. Displays the city name.
 Language. Displays current language been used.
 Timezone. Displays current time zone.
System Time
 System up time. Displays system up time since the last reboot.
 System time. Displays current system time on the phone system.
System Status
GUI and Phone service status.
Core Dump
Core dump file that could be downloaded for troubleshooting purpose.
ACCOUNT PAGE DEFINATIONS
The GXP1610/GXP1620/GXP1625/GXP1628 has two lines that can be configured to accommodate
independent SIP accounts. Every SIP account has an individual configuration page.
Account x -> General Settings
Account Active
This field indicates whether the account is active. The default setting is "Yes".
Account Name
The name associated with each account to be displayed on the LCD.
SIP Server
The URL or IP address, and port of the SIP server. This is provided by your
VoIP service provider (ITSP).
Secondary SIP Server
The URL or IP address, and port of the SIP server. This will be used when the
primary SIP server fails.
Outbound Proxy
IP address or Domain name of the Primary Outbound Proxy, Media Gateway,
or Session Border Controller. It's used by the phone for Firewall or NAT
penetration in different network environments. If a symmetric NAT is detected,
STUN will not work and ONLY an Outbound Proxy can provide a solution.
SIP User ID
User account information, provided by your VoIP service provider (ITSP). It's
usually in the form of digits similar to phone number or actually a phone
number.
SIP Authentication ID
SIP service subscriber's Authenticate ID used for authentication. It can be
identical to or different from the SIP User ID.
SIP Authentication
Password
The account password required for the phone to authenticate with the ITSP
(SIP) server before the account can be registered. After it is saved, this will
appear as hidden for security purpose.
Name
The SIP server subscriber's name (optional) that will be used for Caller ID
display.
Voice Mail UserID
This parameter allows you to access voice messages by pressing the
MESSAGE button on the phone. This ID is usually the VM portal access
number. For example, in Asterisk server, 8500 could be used.
Account x -> Network Settings
DNS Mode
This parameter controls how the Search Appliance looks up IP addresses for
hostnames. There are four modes: A Record, SRV, NATPTR/SRV, and Use
Configured IP. The default setting is "A Record". If the user wishes to locate
the server by DNS SRV, the user may select "SRV" or "NATPTR/SRV". If
"Use Configured IP" is selected, please fill in the three fields below:
 Primary IP: The primary IP address where the phone sends DNS query
to;
 Backup IP 1;
 Backup IP 2.