User's Manual

FIRMWARE VERSION 1.0.5.2 GXP1160/GXP1165 USER MANUAL Page 54 of 59


SAVINGTHECONFIGURAT ION CHANGES 
After users makes changes to the configuration, press the Update button on the bottom of the Web GUI
page. We recommend rebooting or powering cycle the IP phone after saving changes.


REBOOTINGFROMREMOTELOCATIONS

Press the Reboot button on the bottom of the web GUI page to reboot the phone remotely. The web
browser will then display a reboot page with message "The device is rebooting now...". Wait for about 1
minute to log in again.