User's Manual

FIRMWARE VERSION 1.0.5.2 GXP1160/GXP1165 USER MANUAL Page 23 of 59
 Cancel Conference.
 If users decides not to conference after establishing the second call, press EndCall softkey;
 This will end the second call and the screen will show the first call on hold.
 End Conference.
 Press HOLD key
to split the conference call. The conference call will be ended with both
calls on hold; Or
 Users could press the EndCall softkey or simply hang up the call to terminate the conference call.
Note:
 The party that starts the conference call has to remain in the conference for its entire duration, you can
put the party on mute but it must remain in the conversation. Also, this is not applicable when the
feature "Transfer on call hangup" is turned on;
 The option "Disable Conference" under GXP1160/GXP1165 Web GUI->Settings->Advanced Settings
has to be set to "No" to establish conference.
VOICEMESSAGES(MESSAGEWAITINGINDICATOR)
A blinking red MWI (Message Waiting Indicator) indicates a message is waiting. Dial into the voicemail box
to retrieve the message by entering the voice mail number of the server or pressing the MESSAGE key
(Voice Mail User ID has to be properly configured as the voice mail number under Web
GUI->Account page). An IVR will prompt the user through the process of message retrieval.
CALLFEATURES
The GXP1160/GXP1165 supports traditional and advanced telephony features including caller ID, caller ID
with caller Name, call forward and etc.
Table 7: CALL FEATURES
*30 Block Caller ID (for all subsequent calls)
 Off hook the phone;
 Dial *30.