User's Manual

FIRMWARE VERSION 1.0.5.2 GXP1160/GXP1165 USER MANUAL Page 21 of 59
 Auto-Attended Transfer.
 Set "Auto-Attended Transfer" to "Yes" under Web GUI->Advanced Settings page. And then click
"Update" on the bottom of the page;
 Establish one call first;
 During the call, press TRANSFER key
. A new line will be brought up and the first call will
be automatically placed on hold;
 Enter the number and press SEND key
to establish the second call;
 After the second call is established, press TRANSFER key
again. The call will be
transferred;
 If users press the SPLIT softkey before the call is transferred in the step above, the second call will
be resumed.
Note:
 To transfer calls across SIP domains, SIP service providers must support transfer across SIP domains.
3WAYCONFERENCING
GXP1160/GXP1165 can host 3-way conference call with another 2 parties.
 Initiate a conference call.
 Establish 2 calls with 2 parties respectively;
 Press CONFERENCE key
;
 Press FLASH key
. 3-way conference will be established.
 Cancel Conference.
 If after press the CONFERENCE key
, the user decides not to conference, press Cancel
softkey;