User's Manual
Table Of Contents
- FIRMWARE VERSION 1.0.0.8 9
- TECHNICAL SPECIFICATIONS 11
- EQUIPMENT PACKAGING 13
- CONNECT YOUR GWN7000 13
- SAFETY COMPLIANCES 14
- WARRANTY 14
- LED INDICATORS 15
- USE THE CLI INTERFACE 16
- USE THE WEB GUI 17
- STATUS 21
- WAN PORTS 22
- CONNECTING DEVICES TO LAN PORTS 24
- USER MANAGEMENT 24
- TIME&DATE SETTINGS 25
- DEVICE ROLE(MASTER/SLAVE) 26
- OVERVIEW 27
- GWN7610 ACCESS POINT 错误!未定义书签。
- ZONES 31
- CLIENTS 34
- OVERVIEW 37
- UPGRADING FIRMWARE 39
- PROVISIONING AND BACKUP 40
- RESET AND REBOOT 41
- SYSLOG 41
- DOCUMENT PURPOSE
- CHANGE LOG
- WELCOME
- PRODUCT OVERVIEW
- INSTALLATION
- GETTING STARTED
- ROUTER CONFIGURATION
- SETTING UP A WIRELESS NETWORK
- CLIENTS CONFIGURATION
- VPN
- UPGRADING AND PROVISIONING
- EXPERIENCING THE GWN7000 VPN ROUTER
GWN7000 Enterprise Router & Access Point Manager
User Manual
CONFIGURATION SERVER
Users can download and provision the GWN7000 by putting the config file on a TFTP/HTTP or HTTPS
server, and set Config Server to the TFTP/HTTP or HTTPS server used in order for the GWN7000 to be
provisioned with that config server file.
RESET AND REBOOT
Users could perform a reboot under Web GUI->Router->Maintenance by clicking on
button.
Factory Reset
SYSLOG
On the GWN7000, users could dump the syslog information to a remote server under Web GUI
->Router->Maintenance. Enter the syslog server hostname or IP address and select the level for the
syslog information. Five levels of syslog are available: None, Debug, Info, Warning, and Error.
Page | 41