User's Manual

GWN7000 Enterprise Router & Access Point Manager
User Manual
UPGRADING AND PROVISIONING
UPGRADING FIRMWARE
The GWN7000 can be upgraded to a new firmware version remotely or locally. This section describes how
to upgrade your GWN7000 via network or local upload.
UPGRADING VIA WEB GUI
The GWN7000 can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP Address for the
TFTP/HTTP/HTTPS server and selecting a download method. Configure a valid URL for TFTP, HTTP or
HTTPS; the server name can be FQDN or IP address.
Examples of valid URLs:
firmware.grandstream.com/BETA
192.168.5.87
The upgrading configuration can be accessed via Web GUI->Router->Maintenance.
Table 15: Network Upgrade Configuration
Upgrade Via Allow users to choose the firmware upgrade method: TFTP, HTTP
or HTTPS.
Firmware Server Define the server path for the firmware server.
Check Update on Boot
If checked, the device will check if there is a firmware from the
configured firmware server at boot.
Automatic Upgrade check interval(m) Set the value for automatic upgrade check in minutes.
Upgrade Now
Click on button to begin the upgrade. Note that the
device will reboot after downloading the firmware.
UPGRADING VIA CLI
--------------------------------------------------------------------------------------------------------------------------------------------
Note:
Please do not interrupt or power cycle the GWN7000 during upgrading process.
Page | 39