User's Manual

GWN7000 Enterprise Router & Access Point Manager
User Manual
Table 9: Zone Basic
Zone Name
Set or Modify the zone’s name.
Enabled
If checked the zone will be enabled.
WAN Port Membership
Select WAN port 1 or WAN port 2.
Enable IPv4
If checked IPv4 addressing will be enabled.
IPv4 Static Address
Set a static IPv4 address.
IPv4 Subnet Mask
Set IPv4 subnet mask.
DHCP Enabled for IPv4
If checked DHCP server will be enabled on the zone.
DHCP Start Address
Set the DHCP start address to be assigned for clients connected to the
zone
DHCP End Address
Set the DHCP end address to be assigned for clients connected to the
zone
DHCP Lease Time
Set the DHCP lease time, default is 12h.
Enable IPv6
If checked IPv6 addressing will be enabled on the zone and set IPv6
address, IPv6 Prefix and IPv6 Prefix length.
Enable Landing Page
If checked landing page will be enabled.
Landing Page URL
Set the landing page URL.
Added Devices
Shows the list of added access points, click on to delete a device from
the zone.
Available Devices
Shows the list of paired devices, click on to add a device to the zone.
Table 10: Zone
SSID
Set or modify the SSID name.
SSID Hidden
If checked the SSID will be hidden.
Security Mode
Set the security mode for encryption, 5 options are available: WEP 64-bit,
WEP 128-bit, WPA, WPA2 and Open).
Enable Guest Network
If checked guest network will be enabled to create a guest SSID.
Guest SSID
Set on modify the guest SSID name.
Use MAC Filtering
Choose Blacklist/Whitelist to specify MAC addresses to be
excluded/included from connecting to the zone’s. Default is Disabled.
Page | 32