User's Guide

Pairing Procedure
GUV3060
21
3
Headset Components
LED Indicator
GUV3060
Charging Box
USB cable
Quick User Guide
Package contents
Microphone
Touch Point
LED Indicator
USB Port
Opening the top cover of the charging box
will trigger the automatic pairing mode
with both indicator lights flashing.
Note: The pairing takes about 10s and the
sound “connected” indicates its success.
Start pairing
Enable “Bluetooth” function on the phone, search for “GUV3060”, click to connect
and wait for the sound “connected’ indicating its success.
During this process, both indicator lights will turn off first and then the blue indicator
light would turn to slow flashing.
Note: The earbuds would shut down for power saving when not connected to the
Bluetooth device for 5 minutes.
Charging the Charging Box
Connect the Charging Box to a powered USB
port using the USB Type-C cable.
Note: It takes about 2 hours to fully charge the
charging box and the earbuds.
Charging the Earbuds
Wireless Charging
Charging Indicator Status
Place the earbuds inside the Charging Box.
The magnet parts inside would adjust the
earbuds to a fit condition.
Note: It takes about 2 hours to fully charge
the earbuds.
Enter Pairing Mode
Start Pairing
Earbuds
Item
Status
Indicator
Charging
Charging
Fully-charged
Low Battery
Level
Red indicator light on
Green indicator light on
Blue indicator light flashing
every 5 seconds
Fully-charged
Blue indicator light off
Blue indicator light on
Charging
Box
Place the charging box on the center of the
wireless charger (not provided) as shown
in the illustration.
Note: It takes about 4 hours to fully charge
the earbuds and the charging box.
2 Extra Small Earplugs
2 Extra Large Earplugs
True Wireless Earbuds