User's Guide

Wear the GUV3050 Headset
GUV3050
Wireless Bluetooth Headset
2 1
Adjust the Headband
3
Headset Components
Base Charging Point
Bluetooth
indicator
switch
Adjustable headband
Volume up
Volume down
Multi - function button
Power on/Power
Busylight indicator
Microphone
USB charging port
boom-arm
Package contents
GUV3050
Carry pouch
USB cable
BT dongle
Quick User Guide
Charging Base
GUV3050 BT headset
can be worn only on the
right.
Place the headset receiver to
your ears. Adjust the headband
until it is comfortable, ideally
ensuring that there is virtually
no pressure felt on the ears.
To avoid low or distorted sound, and to provide clear and crisp
telephone calls, the microphone should be positioned within 0.5
inches of your mouth. The microphone boom arm will move in a
variety of directions to ensure the best fit.
Charge the battery
Option 1: The headset battery can
be charged when connected to a
PC using an USB cable (provided),
or using any micro-USB charger
(not provided).
Option 2: Plug the charging base
into a powered USB port and then
dock the headset.
Option 1
Option 2
Connect to mobile device (using Bluetooth)
1. Hold the On/off/connect switch in the
connect position for 2 seconds until you
hear the voice guided instruction. The
Bluetooth indicator will flash blue.
2. Follow the voice guided instructions
to connect.
Connect to PC (using BT dongle)
1. Ensure the headset is switched on.
2. Plug the BT dongle into an USB port on
your PC. The headset and BT dongle are
already pre-connected.
Connect the GUV3050 headset