User Guide

GRP26XX Administration Guide
P a g e | 77
SNMP Trap Version
Trap version of the SNMP trap receiver. Default is “Trap Version 2”.
SNMP Trap IP
IP address of the SNMP trap receiver.
SNMP Trap Port
Port of the SNMP trap receiver (Default 162)
SNMP Trap Interval
The interval between each trap sent to the trap receiver
SNMP Trap
Community
Community string associated to the trap. It must match the community string
of the trap receiver.
SNMP Username
Username for SNMPv3
Security Level
• noAuthUser: Users with security level noAuthnoPriv and context name
as noAuth.
• authUser: Users with security level authNoPriv and context name as
auth.
• privUser: Users with security level authPriv and context name as priv.
Authentication
Protocol
Select the Authentication Protocol: “None” or “MD5” or “SHA”.
Privacy Protocol
Select the Privacy Protocol: “None” or “DES” or “AES”.
Authentication Key
Enter the Authentication Key.
Privacy Key
Enter the Privacy Key.
SNMP Trap Username
User name for SNMPv3 Trap.
Trap Security Level
• noAuthUser: Users with security level noAuthnoPriv and context name
as noAuth.
• authUser: Users with security level authNoPriv and context name as
auth.
• privUser: Users with security level authPriv and context name as priv.
Trap Authentication
Protocol
Select the Authentication Protocol: “None” or “MD5” or “SHA”.
Trap Privacy Protocol
Select the Privacy Protocol: “None” or “DES” or “AES”.
Trap Authentication
Key
Enter the Trap Authentication Key
Trap Privacy Key
Enter the Trap Privacy Key.
Network → WiFi Settings (Available on GRP2614 only)
Enable/Disable WiFi
Enables / Disables the WiFi on the phone. Default setting is “No”.
Country
Specifies the Wi-Fi encryption type.
Access Point
SSID
Enters WiFi SSID name to connect.