User Guide

GRP26XX Administration Guide
P a g e | 59
Please note the user must select “Color Background” in “Wallpaper Source”
option in order to use the configurable color background code.
Screensaver
Screensaver
Configures Screensaver Feature, or “to enable Screensaver feature if no
VPK is active”. Please note this option is also available under LCD→
Menu→ Preference→ Appearance. The phone will consider the page
active if VPK is in Early (ringing), Trying (dialing) and Confirmed (talking)
status when VPK is configured with mode “BLF”, “Eventlist BLF” or
“Presence”. By default, screensaver is enabled.
Screensaver Source
Sets the location where screensaver is loaded from.
Show Date and Time
Allows to see time, date and weather on phone’s screensaver mode
Screensaver Timeout
Configures the minutes of idle before the screensaver activates. Valid range
is 3 to 6. The default time is 3 minutes.
Screensaver Server
Path
Configures the server path which contains download screensaver definition
XML.
Screensaver XML
Download Interval
Configures the screensaver XML download interval (in minutes). If set to 0,
automatic download will be disabled. Valid range is 5 to 720.
Settings → Preferences → MPK LCD Settings (Available on GRP2614 only)
MPK LCD Display
Order
Select MPK LCD Display Oder to be either Sequential or Alternating.
Display Contact on
MPK LCD
Select whether or not to display contact on MPK LCD. By default, it’s set NO.
Wallpaper Source for
MPK LCD
Select Uploaded to display the uploaded wallpaper on the MPK LCD.
Upload Wallpaper for
MPK LCD
Upload an image for the MPK LCD wallpaper
Settings → Preferences → LED Control
BLF LED Pattern
This is used to configure the color and pattern of the LED based on status
updates. The default setting is “Default”.
The BLF LED Patterns are listed in [Table 12: BLF LED Patterns].
Disable VM/MSG
power light flash
The VM/MSG light cannot flash even though there’s an unread voice mail or
message when set to “Yes”. Default settings is “No”.
BLF LED Pattern
Explanation Form
Users could view the color and pattern of the LED status based on the BLF
status update.
Settings → Ring Tone
Call Progresses Tones
System Ring Tone
Dial Tone
Second Dial Tone
Configures ring or tone frequencies based on parameters from local telecom.
The default value is North American standard. Frequencies should be
configured with known values to avoid uncomfortable high pitch sounds.