User Guide

GRP26XX Administration Guide
P a g e | 52
Hold Call in Transfer
When set to "No", phone will neither hold the current call in transfer window
nor hold the call with the transfer target before referring the call in the
attended transfer.
Do Not Escape #
as %23 in SIP URI
Specifies whether to replace # by %23 or not for some special situations.
The default setting is “No”.
Click-To-Dial Feature
Enables Click-To-Dial feature. If this feature is enabled, user could click the
green dial button on left top corner of phone’s Web GUI, then choose the
account and dial to the target number. The default setting is “Disabled”.
Default call log type
Sets the default call log list after select MENU→CALL HISTORY. Broadsoft
Call Log or Local Call Log option will only show its own list. Default option
will keep both call log lists.
Return Code When
Refusing Incoming
Call
When refusing the incoming call. The phone will send the selected type of
SIP message of the call. Available options are:
• Busy (486).
• Temporarily Unavailable (480).
• Not found (404).
• Decline (603).
Default setting is “Busy 486”.
Return Code When
Enable DND
When DND is enabled, the phone will send the selected type of SIP
message. Available options are:
• Busy (486).
• Temporarily Unavailable (480).
• Not found (404).
• Decline (603).
Default setting is “Busy 486”.
Enable BLF Pickup
Screen
By enabling BLF Pickup Screen, when monitored BLF is ringing, GRP should
pop up a BLF information window.
The default setting is “No”.
Enable BLF Pickup
Sound
Gives the user the ability to set sound notification to the monitoring BLF line
when it’s ringing, GRP26 should play a sound to inform user.
The default setting is “No”.
BLF Pickup Sound
Except List
Configures the list to be playing BLF sound notification for all except
extensions in this list. Separate extensions by comma (,)
BLF Pickup Sound
Only list
Configures play BLF sound notification only for the list below.
Local Call Recording
Feature
Gives the ability to record calls locally while on the call screen.
The default setting is “Disabled”.
Replace the oldest call
record
When enable, the oldest call record will be replaced with the newest one
when the USB drive is full. If the option is disabled, the call recording feature
will stop recording automatically. Default is “Disabled”.