- Grandstream SIP Enterprise Phone User's Manual GXP 2000
Saving the Con
r make
figuration 
After the use s a chan
The LCD will then display the followi
Grandstream recommends 
Rebooting the Phone from Remote 
ton a
will then display the following sc n
Wait 30 seconds to log-in again
UGH SE
tomatic
wnloading the 
00b82xxx
GAPSLITE - Grandstream A
GXP-2000. It is licensed-based software. GAPSLIT
c
remote  he GA nerate device 
configuration files. 
GAPSLITE is the default for  
provisions the devices with 
provisioning. This could be ettings. 
io
is $99.95. The tool and conf ww.grandstream.com/y-
Changes 
ge to the configuration, press the “Update” button in the Configuration Menu. 
ng screen to confirm saved changes. 
to power cycle the IP phone after saving changes. 
Press the “Reboot” but t the bottom of the configuration menu to reboot the phone remotely. The LCD 
ree  to confirm reboot is underway. 
. 
C
ONFIGURATION THRO
he end-user can au
CURE CENTRAL PROVISIONING SERVER 
ally configure one or more GXP-2000 from a secure central provisioning 
configuration file from the central server. The format of the configuration file 
T
system by do
is as follows: “cfg0 xxx”, where “000b82xxxxxx” is the MAC address of the GXP-2000. 
utomated Provisioning System – supports the automated configuration of the 
E uses enhanced (NAT friendly) TFTP or HTTP and 
other communication proto
reboot, etc. T
ols to communicate with each individual GXP-2000 for firmware upgrade, 
PSLITE software package also has a configuration tool to ge
 all Grandstream devices. Based on the unique MAC address, GAPSLITE
re-direction settings to point to a customer’s TFTP or HTTP server for further 
 simple re-direction or with special provisioning s
The GAPSLITE configurat n tool is free with purchases over 512 units. Under 512 units, the license fee 
iguration templates is available on 
http://w
configurationtool.htm
Please refer to GAPSLITE p ation or contact Grandstream Sales Department for more roduct document
information. 
Grandstream Networks, Inc.  GXP-2000 Users Manual  Page 26 of 33 
  Firmware 1.1.1.14  Last Updated: 12/2006










