- Grandstream Dp710 Dect Ip Accessory Handset And Charger Manual

ManualsBrandsGrandstream Networks ManualsCordless TelephoneDect Ip Accessory Handset And Charger DP710

Firmware version 1.0.0.23 DP715/DP710 User Manual Page 37 of 52

Allow DHCP server to

set Time Zone

Default No. Let the DHCP server handle the Time Zone

Language

Languages supported with voice prompt and web interface, except Spanish that it is only

in IVR.

Reset Type

• Full Reset: This will make a full reset

• ISP Data: This will reset only the basic settings, like IP mode, PPPoE and Web port

• VOIP Data: This will reset only the data related with a service provider like SIP server,

sip user ID, provisioning and others.

In addition to the Basic Settings configuration page, end users also have access to the Device Status page.

Table 12:STATUS PAGE

MAC Address

The device ID, in HEX format. This is very important ID for ISP troubleshooting. The Mac

address will appear in this place. The MAC address will be used for provisioning and can

be found on the label coming with original box and on the label located on the bottom

panel of the device.

RFPI Address

Radio Fixed Part Identity; indicate the unique identification number of the DP715 base

station.

IP Address

This field shows the IP address of the DP715.

Product Model

This field contains the product model info (“DP715”).

Hardware Version

This field shows the hardware revision of the unit and the part number.

Software Version

Program: This is the main software release. This number is always used for firmware

upgrade. Current release is 1.0.0.1 Boot and Loader are seldom changed.

Bootloader:current version is 1.0.0.1.

Core: current version 1.0.0.0

Base: current version is 1.0.0.0

Software Status

Running Mem: 3980, indicate if the software is running and display the memory usage.

System Up Time

Shows system up time since the last reboot.

PPPoE Link Status

Indicates whether the PPPoE connection is up if the DP715 is connected to DSL modem.

NAT

This filed indicates the type of NAT connection used by the DP715.

Base Status

Displays relevant information regarding the Handset subscription status.

Handset

IPUI

TPUI

Handset 1

Yes

015a0178e4

000001

• Handset 1 is subscribed with the DP715 base station.

• IPUI (“International Portable User Identity “): is the identifier of each Handset registered

to the base.

• TPUI (“Temporary Portable User Identity”): Allocated to the Handset automatically by

the DP715 base.