Instructions / Assembly

Step 1
Attach the seat panel 3 to the back panel 4 using the screws B with washers,
aligning the holes. When assembled, tighten the screws with the hex key D.
Requires parts 1, 3, 4, A, D
Step 2
Connect the back panel 4 to the right arm 1 using the screws A with
washers; and then use the screws A with washers to connect the seat panel 3,
aligning the holes. When assembled, tighten the screws with the hex key D.
4
6
PRODUCT NO. 088-2184-2
ASSEMBLY
Note: Do not tighten screws all the way until you have assembled the armchair.
Once assembly is complete, tighten each screw.
3
4
3
1
4
B
A
Requires part 3, 4, B, D