Assembly Instructions

STEP 4: Align the holes in the Wall Bracket(E) with the pilot holes and Drywall Anchors(C).

Thread three Wood Screws(B) and Metal Washers (J) through the holes in the wall

bracket and directly into the wall studs and Drywall Anchors(C). Make sure the Wall

Bracket(E) is level. Tighten all screws securely with a screwdriver.

5a5

Back light

Connector Plug

Two Studs One Stud

Wood Screws(B) Wood Screws(B)

Hooks

Fireplace(A)

Side View

of Fireplace(A)

Front View

of Fireplace(A)

Back of Fireplace(A)

Wall Bracket(E)

NOTE: WE RECOMMEND THAT TWO CAPABLE ADULTS PERFORM THIS PROCEDURE.

STEP 5: With the help of a capable adult, lift the Fireplace(A) and align the two hooks on the back

of the fireplace with the slots on the Wall Bracket(E). Carefully set the hooks into the slots.

STEP 5a: Secure the fireplace to the Wall Bracket(E) with two M4x8 Metal Screws(D), one on

each side. Thread the Metal Screws (D) through the fireplace and into the Wall Bracket(E)

side tabs. Tighten both screws with a screwdriver.

AVOID INJURY and DAMAGE! Wood Screws(B) should be screwed directly

into wall studs when possible.

Wall Bracket(E)

M4x8

Metal Screws(D)

M4x8

Metal Screws(D)

Metal Washers(J) Metal Washers(J)