Assembly Instructions

13
CLEANING
Metal:
• Dust using a brush or lint-free cloth, slightly dampened with a citrus oil-based product.
• DO NOT use brass polish or household cleaners as these will damage the metal.
Glass:
• Spray glass cleaner onto soft cloth (NOT directly on to glass).
Dry thoroughly with a paper towel or lint-free cloth.
• NEVER use abrasive cleansers or any cleaner that could scratch the surface.
Plastic:
• Wipe with a slightly damp cloth and a mild solution of dish soap and warm water.
• Dry off surface.
Vents:
• Use a vacuum or duster to remove dust and dirt from the heater and vent areas as needed.
Electrical and Moving Parts:
• The fan motors are lubricated at the factory and will not require lubrication.
• Electrical components are integrated in the fireplace and are not serviceable by the consumer.
Storage:
• Store heater in a clean dry place when not in use.
CARE AND MAINTENANCE
REMOTE CONTROL BATTERY INFORMATION
ALWAYS turn the heater OFF and unplug the power cord from the outlet before cleaning,
performing maintenance, or moving this fireplace. Failure to do so could result in electric
shock, fire, or personal injury.
NEVER immerse in water or spray with water or other liquids (ex: cleaning solutions).
Doing so could result in electric shock, fire, or personal injury.
h
h
Risk of electric shock! DO NOT OPEN any panels! No user-serviceable parts inside!
h
• This remote control uses one CR2025 battery (included).
• Instructions for battery installation are on the Remote Control Battery compartment.
NEVER dispose of batteries in fire. Failure to observe this precaution may result in an
explosion. Dispose of batteries at your local hazardous material processing center.
h
RELEASE
PUSH
OPEN
CR2025
RELEASE
PULL