User Guide

KEYBOARD & DISPLAY
LCD DISPLAY
Displays the weight onto the load receptor.
Unit of measurement in which the weight is indicated.
Stable weight reading: There is a weight on the platform that is not fluctuating. Intermittent or switched off to indicate that there
is movement in the scale.
Negative sign.
This reading may be negative if a tare is activated or to indicate a problem when setting it to zero.
Indicates net weight. The net weight is the actual weight on the scale minus the tare.
It is only displayed if a tare has been used.
Tare activated.
The reading flashes when “normal” tare mode has been activated.
A “pre-set” tare is retained even after the weight is removed from the scale platform.
Memory pre-set tare. The current tare is a value recorded into the indicator’s memory; it could be not necessarily a measured
value.
Scale is set to zero (weigh is less than ¼ division)
High resolution mode. Additional digit to show the weight with a resolution of 1/10 of the scale division.
Double range mode, when using the scale range 1.
Double range mode, when using the scale range 2.
The weight is below the lower limit.
The 4 segments of this indicator are activated proportionally to the difference between the weight on the pan and the value of
the lower limit. The thickest segment indicates that the weight is less than the value set as a lower limit in a proportion of 100% or
more.
The weight is within the range between the lower limit and the upper (high) limit.
The weight is above the upper (high) limit.
The 4 segments of this indicator are activated proportionally to the difference between the weight on the balance and the value
of the upper limit. The thickest segment indicates that the weight exceeds the value set as the upper limit in a proportion of 100%
or more.
Battery-operated. When not connected to the mains, shows the charge level of the battery.
Plugged to the mains.