Instruction Manual

2. Auger and Meter Roll Drive Trains

PNEG-545 100 Series Portable Dryer 27

Bottom Auger Drive (Continued)

Figure 2B Bottom Auger and Metering Roll Drive Guard

REF # PART # DESCRIPTION

QTY

108T 112 114 116 118 120 122 126

1 D01-1376 BOTTOM FRONT ANGLE BRACKET 1 1 1 1 1 1 1 1

2 D02-0067 BELT - V BX85 2 2

2 MHC00490 BELT - V BX82 2 2 2 2 2 2

3 D03-0174 SHEAVE 2.5 D x 7/8" BORE 1 1

3 2818-2 SHEAVE 2 GR 3.35 D x 1-1/8" 1 1 1

3 D62-0003 SHEAVE 2 GR 4.25 D x 1-3/8" 1 1 1

4 D01-0012 HITCH BRACKET, RIGHT 1 1 1 1 1 1 1 1

5 D01-1373 BELTGUARD, UNLOAD MOTOR SHROUD 1 1 1 1 1 1 1 1

6 D01-0029 HITCH WELDMENT 1 1 1 1 1 1 1 1

7 D01-0011 HITCH BRACKET, LEFT 1 1 1 1 1 1 1 1

8 D01-2435 BOTTOM AUGER BEARING PLATE 1 1 1 1 1 1 1 1

9 D03-0304 SHEAVE 2 GR 20" GRIPBELT 1 1 1 1 1 1 1 1

10 D32-0019 BUSHING Q1-1 1/2" SPLIT TAPER 1 1 1 1 1 1 1 1

11 D01-0065 SPACER, BEARING SHIELD 2 2 2 2 2 2 2 2

*12 D03-1106 MOTOR 1.5 HP 1 PH 1800 RPM 1 1

12 112-3 MOTOR 1.5 HP 3 PH 1800 RPM 1 1

*12 D03-1109 MOTOR 5 HP 1 PH 1800 RPM 1 1 1

12 500-3 MOTOR 5 HP 3 PH 1800 RPM 1 1 1

*12 D03-1010 MOTOR 7.5 HP 1 PH 1800 RPM 1

12 712-3 MOTOR 7.5 HP 3 PH 1800 RPM 1 1

12 1000-3 MOTOR 10 HP 3 PH 1800 RPM 1

13 D01-0081 MOTOR MOUNT - BOTTOM AUGER 1 1 1 1 1 1 1 1

14 D01-0008 FRONT AND REAR FRAME TIE CHANNEL 2 4 4 4 4 4 6 6

15 D01-0007 CORNER LEG 4 4 6 6 6 6 8 8

16 D01-0017 MOTOR ADJUSTMENT BRACKET 2 2 2 2 2 2 2 2

17 D11-0005 FRAME RAIL, 8' RIGHT 1

17 D51-0002 FRAME RAIL, 12' RIGHT 1

17 D21-0011 FRAME RAIL, 14' R.H. 1

17 D01-0538 FRAME RAIL, 16' R.H. 1

17 D31-0044 FRAME RAIL, 18' R.H. 1

17 D61-0002 FRAME RAIL, 20' R.H. 1

17 D101-0002 FRAME RAIL, 22' R.H. 1

17 D71-0002 FRAME RAIL, 26' R.H. 1

18 D01-0016 MOTOR MOUNT SUPPORT BRACKET 1 1 1 1 1 1 1 1

19 D01-1372 BELTGUARD, UNLOAD FRONT SHIELD 1 1 1 1 1 1 1 1

20 PR-331 PEAK CAP HANDLE 2 2 2 2 2 2 2 2

21 DC-971 DECAL, BELT DRIVE WARNING 2 2 2 2 2 2 2 2

22 DC-972 DECAL, CHAIN WARNING 2 2 2 2 2 2 2 2

* Ref # 12, Part # D03-1109 and D03-1010 are Single Phase Motors.