Instruction Manual

10 PNEG-545 100 Series Portable Dryer

1. Main Structure Assembly

Frame, Auger Trough, Hopper Bulkheads and Metering

Rolls Parts List (See Figure 1E, 1F and 1G)

The part number list above covers all parts pointed out on Pages 7, 8 and 9.

REF # PART # DESCRIPTION

QTY

108T 112 114 116 118 120 122 126

1 D01-1136Y PLENUM CLOSURE DOOR ANGLE, R.H. 3 5 6 7 8 9 10 12

2 D01-1136X PLENUM CLOSURE DOOR ANGLE, L.H. 4 6 7 8 9 10 11 13

3 D01-0109 HOPPER BULKHEAD 6 10 12 14 16 18 20 24

4 D01-0004 GUSSET PLATE 10 14 16 18 20 22 24 28

5 D01-0005 SIDE LEG 6 8 10 12 14 16 16 20

6 D01-0007 CORNER LEG 4 6 6 6 6 6 8 8

7 D01-0011 HITCH BRACKET, L.H. 1 1 1 1 1 1 1 1

8 D01-0012 HITCH BRACKET, R.H. 1 1 1 1 1 1 1 1

9 D01-0008 FRONT AND REAR FRAME TIE CHANNEL 2 4 4 4 4 4 6 6

10 D01-2435 BOTTOM AUGER BEARING PLATE 1 1 1 1 1 1 1 1

11 D11-0005 FRAME RAIL, 8' RIGHT 1

11 D51-0002 FRAME RAIL, 12' RIGHT 1

11 D21-0011 FRAME RAIL, 14' RIGHT 1

11 D01-0538 FRAME RAIL, 16' RIGHT 1

11 D31-0044 FRAME RAIL, 18' RIGHT 1

11 D61-0002 FRAME RAIL, 20' RIGHT 1

11 D101-0002 FRAME RAIL, 22' RIGHT 1

11 D71-0001 FRAME RAIL, 26' RIGHT 1

11a D11-0004 FRAME RAIL, 8' LEFT 1

11a D51-0001 FRAME RAIL, 12' LEFT 1

11a D21-0010 FRAME RAIL, 14' LEFT 1

11a D01-0537 FRAME RAIL, 16' LEFT 1

11a D31-0043 FRAME RAIL, 18' LEFT 1

11a D61-0001 FRAME RAIL, 20' LEFT 1

11a D101-0001 FRAME RAIL, 22' LEFT 1

11a D71-0002 FRAME RAIL, 26' LEFT 1

12 D01-0048 TROUGH PANEL 8 12 14 16 18 20 22 26

13 D01-1512 PLATE, CROSS CHANNEL SEAL W/TABS N/A 1 1 1 1 1 2 2

14 D01-1291 HANGER BEARING “C” CHANNEL N/A 1 1 1 1 1 2 2

15 D01-1290 HANGER BEARING “J” PLATE N/A 2 2 2 2 2 4 4

16 D02-0028 CLEVIS PIN 5/16" x 1-3/4" 16 24 32 32 40 40 48 56

17 D31-0148 METER ROLL WASHER 8 12 16 16 20 20 24 28

18 D02-0061 METER ROLL SUPPORT BEARING 2 4 6 6 8 8 10 12

19 D01-0177 SUPPORT STRAP 4 6 7 8 9 10 11 13

20 D01-1511 PLATE, END CHANNEL SEAL W/TAB 2 2 2 2 2 2 2 2

21 D01-2434 DISCHARGE PLATE 1 1 1 1 1 1 1 1

22 D31-0031 METER ROLL, FRONT 4 4 2 4 2 4 2 2

23 D31-0030 METER ROLL, INTERMEDIATE 2 4 4 6 6 8 10

24 D31-0029 METER ROLL, REAR 2 2 2 2