User guide

11
PNEG-1616 1200 VISION X-STREAM PARTS MANUAL
The part number list above covers all parts pointed out on pages 8, 9, and 10.
Meter Rolls and Their Placement in the Dryer
ITEM
NUMBER PART NUMBER
DESCRIPTION 1214 1216 1218 1220 1222 1226
1 D01-1136YPLENUM CLOSURE DOOR ANGLE, RH 67891012
2 D01-1136X PLENUM CLOSURE DOOR ANGLE, LH 7 8 9 10 11 13
3 D01-0109 HOPPER BULKHEAD 12 14 16 18 20 24
4 D01-0004GUSSET PLATE 161820222428
5 D01-0005SIDE LEG 101214161620
6 D01-0007CORNER LEG 666688
7 D01-0011HITCH BRACKET, LH 222222
8 D01-0012HITCH BRACKET, RH 222222
9 D01-0008FRONT & REAR FRAME TIE CHANNEL 444466
10 D01-1374BOTTOM AUGER BEARING PLATE 111111
11 D21-0011-PP FRAME RAIL, 14' RIGHT 1
11 D01-0538-PP FRAME RAIL, 16' RIGHT 1
11 D31-0044-PP FRAME RAIL, 18' RIGHT 1
11 D61-0002-PP FRAME RAIL, 20' RIGHT 1
11 D101-0002-PP FRAME RAIL, 22' RIGHT 1
11 D71-0001-PP FRAME RAIL, 26' RIGHT 1
11A D21-0010-PP FRAME RAIL, 14' LEFT 1
11A D01-0537-PP FRAME RAIL, 16' LEFT 1
11A D31-0043-PP FRAME RAIL, 18' LEFT 1
11A D61-0001-PP FRAME RAIL, 20' LEFT 1
11A D101-0001-PP FRAME RAIL, 22' LEFT 1
11A D71-0002-PP FRAME RAIL, 26' LEFT 1
12 D01-0048TROUGH PANEL 141618202226
13 D01-1512PLATE, CROSS CHANNEL SEAL W/TABS 111122
14 D01-1291HANGER BEARING "C" CHANNEL 111122
15 D01-1290HANGER BEARING "J" PLATE 222244
16 D02-0028 CLEVIS PIN 5/16" x 1 3/4" 32 32 40 40 48 56
17 D31-0148 METER ROLL WASHER 16 16 20 20 24 28
18 D02-0061METER ROLL SUPPORT BEARING 66881012
19 D01-0177 SUPPORT STRAP 7 8 9 10 11 13
20 D01-1511PLATE, END CHANNEL SEAL W/TAB 222222
21 D31-0120DISCHARGE PLATE 111111
22 D31-0031METER ROLL, FRONT 242422
23 D31-0030METER ROLL, INTERMEDIATE 4466810
24 D31-0029 METER ROLL, REAR 2 2 2 2