Manual

9. Assembly
64 PNEG-1510 Top Dry 24', 30' and 36' Manual Batch
Access Door Platform (TDP-5012)
Before assembly of any platform, read the entire instructions to assure proper placement and assembly.
Refer to Figure 9N for proper location of access door platform. Begin by assembling the access door
platform support frame using 5/16" x 3/4" truss head bolts and nuts. When attaching platform vertical
support to bin sidewall field drill sixteen (16) 3/8" diameter holes for each support spaced every 4". Be
sure and use 5/16" x 3/4" bin bolt on vertical support to sidewall. Special attention should be taken when
assembling the platform support that the support brace is placed correctly.
Now proceed to the platform floor. Align holes on platform floor with holes on platform support and bolt
together using 5/16" x 3/4" truss head bolt and nuts. Next, assemble handrail posts, handrails and
handrail braces.
Figure 9N
Ref # Part # Description Qty Weight
1 LS-371 Platform Vertical Angle 42" 3 11.38
2 TDP-5000 Handrail 59" 2 10.15
3 TDP-5002 Handrail 30" 2 10.15
4 TDP-5003 Handrail Brace 36-29/32" 2 6.34
5 TDP-5005 Floor Brace 58-1/2" 3 26.11
6 TDP-5006 Platform Floor 37-7/8" 2 38.23
7 TDP-5007 Support Brace 50-21/32" 2 15.08
8 TDP-5008 Sidewall Brace 58" 2 19.65
9 TDP-5009 Platform Support 43-1/2" 2 12.95
10 TDP-5010 Platform Floor Splice 37-1/2" 1 6.24
11 TDP-5011 Platform Toe Plate 29-3/4" 1 3.29
12 TDP-5008N Sidewall Brace 2.66" 2 16.61
N/S TDP-5014 Access Door Package Hardware 1 5.41