Owner's manual

3. Fan/Heaters

46 PNEG-1471 Vision Series Model 2400 Portable Dryer

Flame Probe, Ignitor and Burner Assemblies (Continued)

Figure 3G

Flame Probe, Ignitor and Burner Assemblies Parts List (See Figure 3E, 3F and 3G)

Ref # Part # Description 28'' F/H 36'' F/H 40'' F/H

1-3 TF-1559-N Flame Probe Assembly Network 1 1 1

1 HH-7025 Boot 8 mm Silicone 90° 1/Assembly

2 THH-4179 Flame Sensor 6" Long Rod 1/Assembly

3 CD-0187 Flame Sensor Bracket 1/Assembly

4-8 TF-1558 Ignitor Assembly 1 1 1

4 HF-7204 Dual Probe Ignitor Bracket 1/Assembly

5 D01-0878 Ignitor Air Deflector Angle 1/Assembly

6 HF-7201 Ignitor Half Clamp 2/Assembly

7 CD-0238 Ignitor Flame 2/Assembly

8 TF-1876 Ignition Wire Assembly (Includes both Wires) 1/Assembly

9 HH-7054 Cone 26"/28" Burner S.S. 1

9 HH-7056 Cone 36"/42" Burner S.S. 1 1

See Chart on Page 45

11 THH-4064 Unilet Type LRL Conduit BX 1/2" 1 1 1

12 027-1006-9 Thermostat - High-limit 200°F Aut 1 1 1

13 D01-1473 Housing High-Limit Plate 1 1 1

14 NO NUMBER Lid for LRL Conduit Box is Part of Ref #11 1/Assembly

15 TFC-0076 Neoprene Gasket, Conduit Body 1 1 1

16-19 BA-28 28" Burner Assembly 1

16 HF-7629 Diverter Weldment 28" 1/Assembly

17 THF-3144 Flame Spreader 28" 1/Assembly

18 THF-3141 Heater Gun Machined 28" 1/Assembly

19 THF-3113 28" Diverter Bracket 1/Assembly

20-24 BA-36 36" Burner Assembly 1

20 THF-3038 Diverter Bracket 36" and 40" 3/Assembly

21 THF-3038P Diverter Bracket 36" and 40" Perfed 4/Assembly

22 THF-3039 Diverter Bracket 36" and 40" with Hole 1/Assembly

23 THF-3057 Flame Spreader 36"-42" 1/Assembly

24 CD-0091 Burner Weldment Cd 36" and 40" 1/Assembly

25-28 BA-40-2 40" Burner Assembly 1

25 CD-0448P Diverter Bracket 42" Perfed 4/Assembly

26 CD-0448 Diverter Bracket 42" 4/Assembly

27 CD-0208 Burner Weldment CD 42" 1/Assembly

28 THF-3057 Flame Spreader 36"-42" 1/Assembly

40" Fan/Heater burner assembly

36" Fan/Heater burner assembly