Owner's manual

2. Top Module

PNEG-1471 Vision Series Model 2400 Portable Dryer 33

Inside (Plenum) Screens and Outside Screens

Figure 2E

Inside (Plenum) Screens and Outside Screens Parts List

The Top Module of the 2400 series dryers have a split plenum the same as the Bottom Module.

See Page 14 for plenum divider part numbers.

Ref # Part # Description

Qty

2414 2418 2420 2422 2426

1 D01-0126 Screen, Plenum Top, Ga, 094 14 18 20 22 26

2 D31-0012 Screen, Plenum Wall, Ga, 094 14 18 20 22 26

3 D01-0124 Screen, Plenum Bottom, Ga, 094 14 18 20 22 26

4 D01-0152 Top Angle Gusset - L.H. 12 16 18 20 24

4a D01-0153 Top Angle Gusset - R.H. 2 2 2 2 2

5 D01-0127Screen, Roof, Ga, 094 1418202226

6 D31-0013 Screen, Outside Wall, Ga, 094 14 18 20 22 26

7 D01-0128 Screen, Hopper, Ga, 094 14 18 20 22 26

8 D61-0019 Module Tie Brace 6 8 10 10 12

9 D61-0073 Screen, Connecting - Outer, Ga, 094 14 18 20 22 24

10a D01-2476 Column End Panel Rear Right 1 1 1 1 1

10b D01-2477 Column End Panel Rear Left 1 1 1 1 1

*NOTE: Ref #4 is pointing to the top edge angle gusset. Two (2) types of gusset are there on the dryer. The

photo above distinguishes the difference between the two.The arrows are pointing to a tab on the gusset that

makes them different (tabs are “bent” up in photo). Ref #4a is used in two places only; 1) front right of dryer

2) rear left of dryer, all others are Ref #4.

10b

10a