User guide

9. Assembly
64 PNEG-1276 Top Dry Autoflow Construction Manual 24', 30' and 36'
Small Platform Assembly (Continued)
36" Fans and Smaller (TD-100092)
Position the vertical support to the existing sidewall stiffeners as shown in Figure 9P and double nut with
5/16" nuts.
Figure 9P
When bolting stiffener to sidewall at locations where platform supports are to be attached, use twenty five
(25) 5/16" x 1-1/4" bin bolts, heads to inside. Start 12" below horizontal seam of second and third rings
from top. (See Figure 9Q.)
Figure 9Q