Accessories PNEG-914 Manual

6. Parts List
PNEG-914 Flex-Flo 53
Unloader Switch
Ref # Part # Description Qty
1 FLX-4157A Back Plate, Unloader Switch Assembly 1
2 FLX-4410 Diaphragm Assembly 1
3 FLX-2380 Small Diaphragm Retainer 1
4 S-849 Hex Nut 10-24 Grade 2 1
5 FLX-4158A Cover Plate Assembly for Switch 1
6 S-3558 3/8" Washer EPDM Steel Backed 1
7 S-4301 Wing Nut 5/16"-18 ZN Grade 2 1
8 FLX-4159 Unloader Switch Housing 1
9 S-3674 Flat Washer #10 x 7/32" I.D. x 1/2" O.D. x 18 Gauge TSAE ZN Grade 2 1
10 S-2010 Nylock Nut #10-24 ZN Grade 2 2
11 07097327 Micro Switch Spring Bracket 1
12 FLX-3493 Control Unit Switch Bracket 1
13 FLX-2128 Boot Switch 1
14 S-7319 Screw, MS #6-32 x 7/8" R.H. Side ZN Grade 2 1
15 S-6144 Hex Nut 6-32 Grade 2 1
16 E160-1074 Ring Terminal #10 Insulated 1
17 WR-16GRN-YLW Wire 16 Gauge Green/Yellow Stranded 1' 1
18 FLX-2690 Electrical Box Gasket 4 x 4 1
19 FLX-2689 Electrical Box Lid 1
20 DC-1088 Decal, Flex-Flo Control Unit 1
21 S-995 Screw, MS #10-24 x 1" PHP SS 1
22 S-7931 Hex Nut #10-24 SS 1
23 BX-302 Box, 13-3/4" x 5-1/2" x 5-1/2" 200C FPF (Not Shown) 1