Accessories PNEG-914 Manual

6. Parts List
PNEG-914 Flex-Flo 49
Flex-Flo Control Unit (FLX-5015) Parts List
Ref # Part # Description Qty
1 FLX-4516 Electrical Box Bottom Drilled 1
2 FLX-4561 4 x 6 Electrical Box Gasket 1
3 FLX-4569 Back Plate, 4 x 6 Control Box 1
4 FLX-5017 Bracket, Terminal Block Mounting 1
5 FLX-5040 Terminal Block Assembly for Flex-Flo Control Unit 1
6 FLX-4517 Electrical Box Lid w/ Decal 1
7 S-995 Screw, MS #10-24 x 1" SS 4
8 S-7931 Hex Nut #10-24 SS 4
9 S-6142 Switch, DPST ON-OFF Toggle 1
10 70-0129 Boot Switch Weather-Proof 1
11 S-6622 ON-OFF Back Plate 1
12 FLX-4620 Relay, Bracket f/ FLX-4619 1
13 FLX-4619 Relay, 4 Pole, ST, N.O., 240V 1
14 DC-1515 Decal, 208V/230V 3 PH Wire Label 1
15 S-7604 Light 250V Sealed Red Pilot 1
16 S-7707 Safety Limit Switch 1
17 S-8823 Screw, TCS23 #8-32 x 3/8" HWHS ZN Green 1
18 S-8183 Screw, MS #6-32 x 3/8" PHP ZN 6
19 S-8686 Screw, TCSF #6-32 x 3/8" PHP ZN 2
20 FLX-4522 Control Unit Base Assembly 1
21 S-3674 Flat Washer #10 x 7/32" I.D. x 1/2 O.D. x 18 Gauge SAE ZN Grade 2 4
22 S-2010 Nylock Nut #10-24 ZN Grade 2 4
23 DC-2124 Decal, ETL/Intertek Mark 1